A Passively [Formula Omitted]-Switched, CW-Pumped Fe:ZnSe Laser
Guardado en:
| Publicado en: | IEEE Journal of Quantum Electronics vol. 50, no. 3 (Mar 2014), p. 204 |
|---|---|
| Autor principal: | |
| Otros Autores: | , |
| Publicado: |
The Institute of Electrical and Electronics Engineers, Inc. (IEEE)
|
| Acceso en línea: | Citation/Abstract |
| Etiquetas: |
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Resumen: | We report the demonstration of high-average-power passively [Formula Omitted]-switched laser oscillation from [Formula Omitted] ions in zinc selenide. A semiconductor saturable absorber mirror was used as a passive [Formula Omitted]-switch element. Using a 60% R outcoupler, the pump-limited output power was 515 mW. The spectral center of the laser was 4045 nm. The pulse repetition frequency (PRF) at maximum power was [Formula Omitted] with a corresponding minimum pulsewidth of 64 ns Full-Width Half-Maximum. The pulse energy and peak power were [Formula Omitted] and 8.3 W, respectively. The average output power was limited only by available pump power and increased with a slope efficiency of 22%. No thermal rolloff of slope-efficiency was observed. The beam quality was measured to be [Formula Omitted]. The temporal stability of the pulsed output was characterized. Thermal effects were shown to play a significant role in determining the PRF of the output. |
|---|---|
| ISSN: | 0018-9197 1558-1713 |
| DOI: | 10.1109/JQE.2014.2302233 |
| Fuente: | Advanced Technologies & Aerospace Database |