Online Compensation Method for Contour Error in the Parallel Module of a Hybrid Gantry Machining Center
Guardado en:
| Publicado en: | Chinese Journal of Mechanical Engineering = Ji xie gong cheng xue bao vol. 38, no. 1 (Dec 2025), p. 146 |
|---|---|
| Autor principal: | |
| Otros Autores: | , , |
| Publicado: |
Springer Nature B.V.
|
| Materias: | |
| Acceso en línea: | Citation/Abstract Full Text Full Text - PDF |
| Etiquetas: |
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Resumen: | Contour error is the deviation between the actual displacement and reference trajectory, which is directly related to the machining accuracy. Contour error compensation poses substantial challenges because of the time-varying, nonlinear, and strongly coupled characteristics of parallel machining modules. In addition, the time delay in the system reduces the timeliness of the feedback data, thereby making online contour error calculations and compensation particularly difficult. To solve this problem, the generation mechanism of the time delay of the feedback data and contour error is revealed, and a systematic method for the identification of the time-delay parameter based on Beckhoff's tracking error calculation mechanism is proposed. The temporal alignment between the position commands and feedback data enables the online calculation of the contour error. On this basis, the tracking error of the drive axes (an important factor resulting in end-effector contour errors) is used for the contour error calculation. Considering the ambiguous parameter-setting logic of the servo drive, the servo parameter is calculated in reverse using the steady-state error to obtain the tracking error model of the drive axes. Furthermore, combined with the system time-delay model, an online correction method for the tracking error estimation model is established. To achieve an accurate mapping of the drive-axis tracking error and end-effector contour error, a bounded iterative search method for the nearest contour point and online calculation model for the contour error are respectively established. Finally, an online compensation controller for contour error is designed. Its effectiveness is verified by a machining experiment on a frame workpiece. The machining results show that the contour error reduces from 68 μm to 45 μm, and the finish machining accuracy increases by 34%. This study provides a feasible method for online compensation of contour error in a system with time delay. |
|---|---|
| ISSN: | 1000-9345 2192-8258 |
| DOI: | 10.1186/s10033-025-01300-z |
| Fuente: | Engineering Database |